Epoch 48V 30Ah GC2 – Golf Cart LiFePO4 Lithium Battery
What's Included
Description
- LiFePO4 Chemistry
- 30Ah Capacity
- 60A Max Continuous (100A 10S Pulse) (200A 3S Pulse)
- IP67 Rated, Dust and WATERPROOF
- CAN Bus Communication
- Built-in Smart Battery Management System (BMS)
- Over charge and over discharge protection
- Over current and short circuit protection
- High & low temperature disconnects
- 4000+ Cycle life & Maintenance-free
- 11 Year Manufacturer Warranty
Specifications
Configuration
Cell Configuration: 16S
Chemistry: LiFePO4
Current
Ah Capacity: 30Ah
Max Charge Current Amps: 30A
Max Discharge Peak Current Amps: 100A (10 Seconds) – 200A (3 Seconds)
Series | Parallel: Max (10) in Parallel = 300 Amp Hours
Voltage
Voltage: 51.2V Nominal
Max Charge Voltage: 57.6V
Operating Voltage Range: 40.0 – 57.6V
Temperature
Charge Temp Range: 0°C (32°F) / 55°C (131°F)
Discharge Temp Range: -20°C (-4°F) / 55°C (131°F)
Storage Temp: 0°C (32°F) / 30°C (86°F) (<6 Months)
Weights & Dimensions
Weight: 33 (LBS)
Dimensions
Length: 10.25 (inches)
Width: 7 (inches)
Height: 11 (inches)
Additional Information
M8 Terminals – Torque Tension Recommendation is 8-12N·M
Pack Certifications: UN38.3, CE
Cell Certifications: UL1642, UL2580, UN38.3
Recommended Charging Settings
To properly charge your Epoch Batteries, you will want to verify that any charging component in your system is capable of being programmed for the following specifications. Charging components can include, but are not limited to converters, inverter chargers, solar charge controllers, DC to DC chargers, etc.
-
- Bulk/Absorption: 14.2V – 14.6V
- Absorption Time: Two batteries in parallel connections require 30 minutes 200Ah
- Float: 13.4V – 13.8V
- Equalization: 14.4V/ Disabled
- Temperature Compensation: 0/Disabled
- Charge Rate: 50% of the battery or battery bank capacity
- Battery Charge Temperature Range: 32°F (0°C) to 131°F (55°C)
- Battery Discharge Temperature Range: -4°F (-20°C) to 140°F (60°C)
- Cell Charge Temperature: 32°F (0°C) to 131°F (55°C)
NOTE: Not all chargers are capable of multistage charging. If yours is not, you will want to verify it can be programmed for the Bulk/Absorption voltage and have the other items mentioned disabled if applicable. Consult your charger’s manual or the manufacturer.






